|
|
@@ -37,6 +37,26 @@ Roadmap
|
|
|
- act as a consolidation of I2C, SPI or UART (or other peripheral management) coming in to funnel to the Raspberry Pi
|
|
|
- house the 5W/15W+ amplifier
|
|
|
|
|
|
+There should be a power and sensing board created that has the following features:
|
|
|
+
|
|
|
+* Transient suppression:
|
|
|
+ - Input range of 8V-48V
|
|
|
+ - 2.5kV transient suppression
|
|
|
+* Power output
|
|
|
+ - Provide 5V 5A (25W) rail
|
|
|
+ - Provide 12V 1A (12W) rail
|
|
|
+* Power monitoring
|
|
|
+ - High side voltage and amperage monitoring
|
|
|
+ - 5V rail voltage and amperage monitoring
|
|
|
+ - 12V rail voltage and amperage monitoring
|
|
|
+* Accelerometer and gyroscope (**optional**)
|
|
|
+* Barometric pressure (**optional**)
|
|
|
+* Temperature (**optional**)
|
|
|
+* Vibration (**optional**)
|
|
|
+* Gas (**optional**)
|
|
|
+
|
|
|
+
|
|
|
+
|
|
|
TODO
|
|
|
---
|
|
|
|
|
|
@@ -66,3 +86,13 @@ References
|
|
|
* [SCI16IS740/750/760](https://www.nxp.com/docs/en/data-sheet/SC16IS740_750_760.pdf) UART with I2c/SPI interface
|
|
|
* [ADS1015 12 bit ADC](https://www.adafruit.com/product/1083)
|
|
|
* [4N25S-TA1 Optoisolator](https://www.digikey.com/product-detail/en/lite-on-inc/4N25S-TA1/160-1910-1-ND/3711405)
|
|
|
+* [WSP2110 Gas Sensor (VOC)](https://store.arduino.cc/usa/grove-hcho-sensor)
|
|
|
+* [BMP180 Barometric/Pressure/Temperature/Altitude Sensor](https://www.adafruit.com/product/1603)
|
|
|
+* [MQ2 Gas Sensor (LPG, i-butane, propane, methane, alcohol, hydrogen, smoke)](https://wiki.dfrobot.com/Analog_Gas_Sensor_SKU_SEN0127)
|
|
|
+* [MPU-6050 3-Axis Accelerometer and Gyroscope](https://www.adafruit.com/product/3886)
|
|
|
+* [FXOS8700 + FXAS21002 9-DOF Accelerometer and Magnetometer](https://www.adafruit.com/product/3463)
|
|
|
+* [ACS732 Current Sensor](https://www.sparkfun.com/products/13679)
|
|
|
+* [Transient Suppression Devices and Principles - Littlefuse](https://www.littelfuse.com/~/media/electronics_technical/application_notes/varistors/littelfuse_transient_suppression_devices_and_principles_application_note.pdf)
|
|
|
+* [INA260 Power Sensor](https://www.adafruit.com/product/4226)
|
|
|
+* [INA169 Power Sensor](https://www.adafruit.com/product/1164) ([datasheet](https://cdn-shop.adafruit.com/datasheets/ina169.pdf) [INA169-Q1](http://www.ti.com/lit/ds/symlink/ina169-q1.pdf))
|
|
|
+* [NA169 Breakout Board Hookup Guide](https://learn.sparkfun.com/tutorials/ina169-breakout-board-hookup-guide)
|
abetusk
