rfid-7304d2.md 2.2 KB
Dual Frequency RFID Reader/Writer Wireless Module 5cm ISO14443A EM4100
Cost: $10
| Features | |
|---|---|
| Power | DC 5-15V |
| Operating Current | max < 100mA |
| Operating Frequency | 13.56MHz+/-5KHz; 125KHz |
| Support common ISO14443A protocol | |
| Support EM4100 and its compatible card | |
| Card Reading Distance | IC>5cm; ID>5cm |
| 1 channel Wiegand data output port, support WG26, WG34 multiple format to choose | |
| Card sensor speed is lower than 100ms | |
| 1 channel LED control input | |
| 1 channel BUZ control input | |
| Size | 74*115*16mm |
| Operating Temperature | -20~60 Celsius |
| Operating Humidity | 10%-95% |
| Pin | Color | Name | Description |
|---|---|---|---|
| 1 | Red | VCC | Power Input Port |
| 2 | Brown | FOR | Wiegand Format Selection |
| 3 | Blue | none | Undefined |
| 4 | Yellow | BUZ | Buzzer Control |
| 5 | Orange | LED | LED Control |
| 6 | Green | D1 | Wiegand Output |
| 7 | White | D0 | Wiegand Output |
| 8 | Black | GND | Power Ground |
| ISO14443 TYPE A |
|---|
NXP_Mifare 1K |
NXP_Mifare 4K |
NXP_Mifare mini |
Ultralight(C) |
Mifare PlusX(S) |
Desfire D21 D41 D81 |
NTAG203(F) |
| 125KHZ |
|---|
| EM4100 |
| EM4200 |
| JT120 |
Data Output Format
When it sensors the card, the serial number will be output via Data 0, Data 1 two data wire.
Data 0 and Data 1 are high level when there is no data output.
Logic Definition:
- Data Bit 0: it will generate 200us low level on Data 0 wire
- Data Bit 1: it will generate 200us low level on Data 1 wire
Every data length is 2200us
Every Mifare card has a serial number with 4 bytes, users should output the last three bytes.
Add the first 12-bit even check bit in the front and add the last 12-bit odd check bit in the back, 26-bit data in total.
For example：
- Card number is
6B 3D 12 D6 - Output data is
3D 12 D6
Wiegand26 Encode
| 0 | 00111101 | 00010010 | 11010110 | 1 |
|---|---|---|---|---|
| Even Check | 3D | 12 | D6 | Odd Check |