Popufare Driver Interface Unit Housing
===

###### 2019-11-13

![housing preview](img/housing.png)

This is Version 2 of the Driver Interface Unit (DIU) housing.

This is a "living" document and updates should be expected.

The material is yet to be determined but could be made of delrin,
PVC or something else equally as durable.

The housing consists of 7 pieces.

* Back Plate - This has an adapter hole for a wiring gland
* Bottom Plate - This has 4 moutning screw holes and a middle open segmentj
* Left/Right Plate - This has openings for both speaker and antennae for GPS and GPRS
* Top Plate
* Front Angle Plate - This is where the screen and touchscreen go
* Front Bottom Plate

Further:

* The `Back Plate` and `Top Plate` are attached to each other.
* The `Back Plate` is affixed to the `Bottom Plate` by a hinge.
* The `Bottom Plate`, `Left Plate`, `Right Plate`, `Front Bottom Plate` and `Frton Angle Plate` are all attached
  to each other.

The main form of attachment angle brackets with M3 to M5 bolts.