popufare/experiment/production/housing/v-amaranth/housing_layout_3d.scad

include <PopufareHousingCommon.scad>

include <PopufareHousingBottom.scad>
include <PopufareHousingFrontAngle.scad>
include <PopufareHousingFrontBottom.scad>

include <PopufareHousingFrontInsideSupport1.scad>
include <PopufareHousingFrontInsideSupport2.scad>
include <PopufareHousingFrontInsideSupport3.scad>
include <PopufareHousingFrontInsideSupport4.scad>

include <PopufareHousingSideLeft.scad>
include <PopufareHousingSideRight.scad>
include <PopufareHousingTop.scad>
include <PopufareHousingBack.scad>

include <PopufareHousingInnerBack.scad>

include <PopufareHousingBackLipAttachment.scad>

include <PopufareHousingMAX232Bracket.scad>
include <PopufareHousingPowerAdapterTop.scad>
include <PopufareHousingPowerAdapterMid.scad>

spacing = 30;

dw = POPUFARE_HOUSING_WIDTH;
dh = POPUFARE_HOUSING_HEIGHT;
dz = POPUFARE_HOUSING_DEPTH;

dbacklip = POPUFARE_HOUSING_BACK_LIP_HEIGHT;

iw = POPUFARE_INNER_PLATE_HOLE_WIDTH;
ih = POPUFARE_INNER_PLATE_HOLE_HEIGHT;

hh = POPUFARE_FRONT_HEIGHT;
hz = dz-hh;


//PopufareHousingBottomPlate();
translate([ 0, dz/2 + 30, 0])
  PopufareHousingBackLipAttachmentPlate();

translate( [ -(dw/2 + spacing), 0, dh/2 + spacing ] ) rotate(-90, [0,1,0]) rotate(-90, [0,0,1])
  PopufareHousingSideRightPlate();
translate( [  (dw/2+spacing), 0, dh/2 + spacing ] ) rotate(90, [0,1,0]) rotate(90, [0,0,1])
  PopufareHousingSideLeftPlate();

translate( [ 0, -(dh/2 + spacing), hh/2 + spacing]) rotate(90, [1,0,0])
  PopufareHousingFrontBottomPlate();

translate( [ 0, -(dh/2 + spacing - 20), hh/2 + spacing]) rotate(90, [1,0,0])
  PopufareHousingFrontInsideSupport1Plate();

translate( [ 0, -(dh/2 + spacing - 40), hh/2 + spacing]) rotate(90, [1,0,0])
  PopufareHousingFrontInsideSupport2Plate();

translate( [ 0, -(dh/2 + spacing - 60), hh/2 + spacing]) rotate(90, [1,0,0])
  PopufareHousingFrontInsideSupport3Plate();

translate( [ 0, -(dh/2 + spacing - 80), hh/2 + spacing]) rotate(90, [1,0,0])
  PopufareHousingFrontInsideSupport4Plate();


translate( [ 0, -dz/2, hh + sqrt(2)*(dh-hh)/2 + spacing] ) rotate(45, [1,0,0])
  PopufareHousingFrontAnglePlate();

translate( [ 0, dz/2 + spacing, dh/2 + spacing + dbacklip/2] ) rotate(90, [1,0,0])
  PopufareHousingBackPlate();
translate( [ 0, dw/2 - 50, dz + spacing] ) PopufareHousingTopPlate();

//---

translate([  0, -1.3*dh, 90])
  rotate(45, [1,0,0])
  PopufareHousingInnerBackPlate();
  

translate([  200, 30, 90])
  rotate(-90,[0,0,1])
  rotate(-90,[1,0,0])
  PopufareHousingMAX232BracketPlate();

translate([  200, -15, 60])
  rotate(-90,[0,0,1])
  rotate(-90,[1,0,0])
  PopufareHousingPowerAdapterTopPlate();  
  
translate([  180, -15, 60])
  rotate(-90,[0,0,1])
  rotate(-90,[1,0,0])
  PopufareHousingPowerAdapterMidPlate();