| 1234567891011121314151617181920212223242526272829303132333435363738394041 |
- # You can use this script unmodified to connect to cellular networks.
- # The APN is specified in the peers file as the argument of the -T command
- # line option of chat(8).
- # For details about the AT commands involved please consult the relevant
- # standard: 3GPP TS 27.007 - AT command set for User Equipment (UE).
- # (http://www.3gpp.org/ftp/Specs/html-info/27007.htm)
- #
- # intended for use with the FONA GPRS modem
- #
- ABORT BUSY
- ABORT VOICE
- ABORT "NO CARRIER"
- ABORT "NO DIALTONE"
- ABORT "NO DIAL TONE"
- ABORT "NO ANSWER"
- ABORT "DELAYED"
- ABORT "ERROR"
- # cease if the modem is not attached to the network yet
- ABORT "+CGATT: 0"
- "" AT
- TIMEOUT 12
- OK ATH
- OK ATE1
- # +CPIN provides the SIM card PIN
- #OK "AT+CPIN=1234"
- # +CFUN may allow to configure the handset to limit operations to
- # GPRS/EDGE/UMTS/etc to save power, but the arguments are not standard
- # except for 1 which means "full functionality".
- #OK AT+CFUN=1
- OK AT+CGDCONT=1,"IP","\T","",0,0
- OK ATD*99#
- TIMEOUT 22
- CONNECT ""
|
